PRING SX

Ring Bit Casing System – PRING-SX

The Pneumec P-RING concentric drilling system is designed to drill and case a hole simultaneously through unstable ground conditions.  The driver bit incorporated with a sacrificial ring or reusable ring makes it a perfect drill with a complete full face that significantly improves the penetration rate and hole straightness.  The internal flushing grooves together with the casing shoes gives a good seal to the bottom of the drilling hole, and thus minimizing the disturbance to the surroundings in certain sensitive ground conditions.

The Pneumec PRING-SX system has a completely full face concentric design consisting of a driver bit, a ring assembly with the ring and casing shoe attached together.  Similar to the PRING-S system, the ring assembly is designed for single use.  However, it has a larger ring ID so that if it is required to drill continuously into the rock socket with a button bit, this is the system to go for.

PRING-E CASING SYSTEM’ CHOICES
MODEL
CASING
RING
PILOT BIT
SHANK TYPE
O.D.
I.D.
O.D.
I.D.
DIA.
PRING-SX90

114MM

102MM

 125MM

82MM

80MM

DHD3.5

PRING-SX115

141MM

126MM

155MM

112MM

110MM

DHD340

PRING-SX 140

168MM

153MM

180MM

132MM

130MM

DHD350

PRING-SX 165

194MM

181MM

215MM

154MM

152MM

DHD360

PRING-SX 190

219MM

203MM

238MM

175MM

173MM

DHD360

PRING-SX 215

254MM

240MM

276MM

207MM

205MM

DHD380

PRING-SX 240

273MM

260MM

293MM

226MM

224MM

DHD380

PRING-SX 280

323MM

302MM

345MM

273MM

272MM

SD-10

PRING-SX 315

355MM

335MM

375MM

302MM

300MM

SD-10

PRING-SX 365

406MM

387MM

432MM

352MM

350MM

N125

PRING-SX 460

508MM

483MM

530MM

446MM

444MM

N125

PRING-SX 510

559MM

533MM

580MM

493MM

490MM

N180

PRING-SX 560

610MM

584MM

642MM

555MM

553MM

N180

PRING-SX 610

660MM

632MM

685MM

592MM

590MM

N240

PRING-SX 660

711MM

685MM

735MM

641MM

639MM

N240

PRING-SX 745

813MM

780MM

838MM

736MM

734MM

N240